S-1 is a versatile high alkaline compound formulated to degrease oily ferrous metal parts.
It promotes rapid deburring and optimum surface
improvement when used in tumbling and
vibratory finishing operations. It is inhibited to
help prevent oxidation during short term interim process storage. |
| PHYSICAL PROPERTIES |
| Appearance |
Off White Powder |
| pH @ 1% Solution |
12.55 |
| Solubility in Water |
Excellent |
| Foaming action |
Controlled |
| Rinsing Action |
Excellent |
| Odor |
Mild |
| Metal Safety |
Ferrous Metals Only |
|
Progress Chemical guarantees its products will
perform to your satisfaction when used in accordance
to our recommendations. W e back this guarantee with
over 60 years experience. Our company has been
certified to ISO 9001:2000 Quality Standards. |
 |
|
For vibratory and rotary barrel finishing
operations Tumbling and vibratory finishing
operations use 1 to 4 ounces per gallon of water.
The concentration requirements will vary
depending on nature of parts, nature of alloy,
mass to water ratios, types of media used (if
any), soil conditions, cycle time requirements, equipment used, and finish desired.
|
|
This product poses no fire hazards. Highly
alkaline product. Avoid contact with skin eyes
and clothing. Use good industrial hygiene
practices such as wearing chemical safety
goggles, rubber gloves, impermeable apron,
rubber boots and other protective measures as
necessary to prevent personal contact with
product. In case of contact with skin or eyes,
flush with water for 15 minutes and contact
physician immediately. Remove contaminated
cloth-ing and launder before reuse. Store in
properly labeled closed containers in cool dry place and rotate stock.
|
Refer to our Material Safety Data Sheet for additional
information. Rev. 1/09
|
Get Adobe PDF Version  |
