MHD is a multi-purpose abrasive compound
containing silica, aluminum oxide, and other
polishing agents. Blended into this
compound is an alkaline detergent system,
which not only loosens and suspends soils,
but also keeps media clean and prevents
impingement. It also contains inhibitors which help prevent oxidation.
|
| PHYSICAL PROPERTIES |
| Appearance |
Gray Powder |
| pH @ 1% Solution |
11.2 |
| Solubility in Water |
Partial |
| Foaming Action |
Controlled |
| Rinsing Action |
Good |
| Odor |
Pine |
| Metal Safety |
All Metals |
| Flash Point |
None |
|
Progress Chemical guarantees its products will
perform to your satisfaction when used in accordance
to our recommendations. W e back this guarantee with
over 60 years experience. Our company has been
certified to ISO 9001:2000 Quality Standards. |
 |
|
Usage will vary greatly depending on nature
of parts, amount of water used, time
requirements, finish desired, equipment
employed, media used (if any), and other
physical properties related to process.
Consult your sales representative for recommendations specific to your operation.
|
|
This product poses no fire hazards. Use
good industrial hygiene practices such as
wearing chemical safety goggles, rubber
gloves, impermeable apron, rubber boots and
other protective measures as necessary to
prevent personal contact with product.
NIOSH approved respirator should be worn if
TLV exceeds recommended levels for
crystalline silica contained in this product. in
case of eye contact, flush eyes with plenty of
water for 15 minutes and consult physician.
In case of skin contact flush with plenty of
water. Remove con-taminated clothing and
launder before reuse. Store in properly
labeled containers in a cool dry place and
rotate stock. When stored as stated above, shelf life is a minimum of 2 years.
|
Refer to our Material Safety Data Sheet for additional
information. Rev. 1/09
|
Get Adobe PDF Version  |
