AD-593 is a parts washing compound for use in
heated spray wash applications. It was
specifically formulated for removing grease, oil,
rust, scale, and smut from ferrous metal
surfaces. This product combines potent wetting
and chelating agents with a high alkaline build to
work effectively under heavy soil conditions. |
| PHYSICAL PROPERTIES |
| Appearance |
Off White Granular Powder |
| pH @ 1% Solution |
13.2 |
| Foaming action |
Very Low |
| Rinsing Action |
Excellent |
| Odor |
Mild |
| Metal Safety |
Ferrous Metals Only |
| Flash Point |
None |
| Bulk Density |
60 |
|
Progress Chemical guarantees its products will
perform to your satisfaction when used in accordance
to our recommendations. W e back this guarantee with
over 50 years experience. Our company has been
certified to ISO 9001:2000 Quality Standards. |
 |
|
This product is intended for use in automated
spray application parts washers. Solution
concentrations should be maintained between 10
and 32 ounces per gallon of water. Cleaning
solution temperatures should be maintained
between 150° and 190° F. Periodic adds of 1 to
2 ounces per gallon should be made to extend
cleaning solution life. Usage may vary depending
on soil load, nature of parts, equipment design,
time requirements and other physical properties
related to the process. |
|
This is a highly alkaline product containing
Sodium Hydroxide. Use good industrial hygiene
practices such as wearing chemical safety
goggles, rubber gloves, impermeable apron, and
other appropriate protective clothing to prevent
personal contact. Wash thoroughly after
handling this product. In case of skin or eye
contact, flush with plenty of water for at least 15
minutes and call a physician. Stock should be
rotated and stored in a tightly closed container
within a cool dry place to reduce caking. When
stored as stated above, shelf life is a minimum of
2 years. |
Refer to our Material Safety Data Sheet for additional
information. Rev. 1/09
|
Get Adobe PDF Version  |
