Presenting our 1830-s Concentrate; a mild, organic acid product which safely and efficiently
removes smut, scale and oxides from ferrous
and non-ferrous metals, resulting in a deep
reflective finish. Formulated for use in ultra-
sonic cleaning systems, 1830-S not only
removes corrosion, but it helps prevent parts
from corroding after cleaning. The days of using
strong, hazardous, and corrosive inorganic acid
cleaners are gone with the introduction of 1830-S Cleaning Concentrate.

For stripping metal oxides from parts in soak
tanks or ultrasonic cleaning applications, use 9
ounces per gallon of water (7% solutions).
Concentrations higher than 7% will not work
more efficiently. We recommend the use of a
quality ultrasonic unit for highest efficiency. Rust
and scale can normally be removed in 30
seconds to 2 minutes. The same concentrations may be used for passivation of stainless steel.

This product does not pose any fire hazards.
Use good industrial hygiene practices such as
wearing rubber gloves and an impermeable
apron to protect sensitive skin. Chemical safety
goggles should be worn to protect eyes. If eye
contact occurs, flush with plenty of water for at
least 15 minutes and consult a physician. In
case of skin contact, wash with soap and water,
removing contaminated clothing and shoes.
Keep product containers tightly closed when not
in use. Store in the original container between
45° and 85°F. When stored as above, shelf life is a minimum of 2 years.

Refer to our Material Safety Data Sheet for additional product information. Rev. 1/09