1235 is specifically formulated to deal with the special requirements of cleaning brass or
multiple ferrous and non-ferrous alloys in one
cleaning operation. It is designed specifically to
be used in spray application parts washers and
ultra-sonic tanks. Not only is it capable of
dispersing large amounts of particulate and
solids, but also splitting oil out of solution, thus
greatly extending cleaning solution life. Special
sequestering agents help prevent scale build up
in machines. This product contains inhibitor for interim process protection.
|
| PHYSICAL PROPERTIES |
| Appearance |
Clear Colorless Liquid |
| Specific Gravity |
1.05 |
| pH @ 1 % Solution |
10 |
| Solubility in Water |
Excellent |
| Odor |
Mild |
| Flash Point |
None |
| Stability |
Stable |
| Foaming Action |
Controlled |
| Metal Safety |
Aluminum,
Steel,
Brass, Copper, Zinc |
|
Progress Chemical guarantees its products will
perform to your satisfaction when used in accordance to our recommendations. We back this guarantee with over 60 years experience. Our company has been certified to ISO 9001:2000 Quality Standards.
|
 |
|
For use in spray washer applications use 4 to 8
ounces per gallon of water. Solution operating
temperature should be maintained between 120°
and 170° F. to maintain optimum cleaning and
foaming characteristics. Exceeding 140deg. F. may discolor sensitive brass alloys.
|
|
This is a non-combustible alkaline liquid. Use
good industrial hygiene practices such as
wearing chemical safety goggles, rubber gloves,
impermeable apron, and rubber boots as
necessary to avoid personal contact with this
product. In case of contact, flush eyes and/or
skin with plenty of water for at least 15 minutes.
Consult physician and remove contaminated
clothing promptly. Store product in tightly closed
containers between 50° and 85° F. Rotate stock.
When stored as stated above, shelf life is a minimum of 2 years.
|
Refer to our Material Safety Data Sheet for additional
information. Rev. 1/09
|
Get Adobe PDF Version 
|
